Redragon keyboards offer a lot of amazing lighting features. But sometimes due to some reasons may be Redragon keyboard lights not working. Here we will cover all the possible reasons that can cause Redragon keyboard lights failure and we will also discuss their solutions.
Redragon Keyboard Lights Not Workings Reasons:
1) May Lights Turned Off From Keyboard
The first possible reason for Redragon keyboard lights not working is maybe keyboard lights are turned off from the keyboard shortcuts. Check out your keyboard and press the lights switch key combinations to turn on Redragon keyboard lights.
2) Software Issue
The second possible reason why your Redragon keyboards lights are not working is a fault or keyboard settings from your Redragon keyboard software. Open the software and go to the backlit section. Checkout all the settings.
3) Power Supply Failure:
The power supply is one of the most important parts of any electronic device, it provides power for all other components. If there is no power supply then nothing works properly. So if you are facing this problem then first check your power supply whether it’s working or not. If yes then replace it with a new one.
4) Bad Battery:
If the battery is dead then it will not work properly. Replace the battery with a new one.
5) Dead Key Switch:
It means when you press a key on the keyboard it does not respond. It happens because of a bad switch. You need to change it.
6) Bad Circuitry Board:
Sometimes the circuit board gets damaged so it stops working properly. In such cases, you need to replace it.
7) Bad Motherboard:
Sometimes motherboard fails to operate properly. In such a case, you need to replace it with a new one as soon as possible.
8) Bad Cable:
The cable is a very important part of the keyboard. If the cable is broken then the keyboard will not work properly. You need to replace it. If you have more than one cable then try to use only one cable at a time.
9) Bad USB Port:
The USB port is used to connect external devices like a mouse, printer, etc. Sometimes USB ports get damaged and they stop working. In such cases, you should replace them.
10) Bad Driver:
The driver is software that controls hardware components. If the driver is corrupted then it will not work correctly. In such cases, you must download the latest version of the driver from the manufacturer’s website.
Redragon Keyboard Lights Not Working Solutions:
There are many ways to fix these problems but here I am going to share two methods by which you can easily solve these issues.
Method 1: How To Turn On Redragon Keyboard Lights?
- To turn on the lights of the Redragon keyboard press the “Fn+↑” keys.
- It will gradually increase the brightness of your Redragon keyboard after turning on the lights.
- If it does not work try pressing F5, F9, or F11 or Fn + F5, F9, or F11.
- It will turn on your Redragon keyboard lights if it is turned off from the keyboard.
Method 2: Reset Your Redragon Keyboard
Press the “Ctrl+Alt+Delete” keys simultaneously. This will reset your Redragon keyboard. After doing this, you can see the lights of your keyboard again.
You can also restart your computer using this method.
First of all, remove all cables from the keyboard and plug them into the computer directly. Then turn off the computer and wait for a few minutes. After that open Device Manager and look for the “Keyboards” category. Now right-click on it and select the “Update Driver Software” option. This will update all drivers automatically.
How to change the lights on the Redragon keyboard?
The lights on the Redragon keyboards are controlled by firmware. There are three different types of lights available on the Redragon keyboards. They are backlit, ambient light sensor (ALS), and RGB lighting. The backlight is the default type of light. It has an LED light source which gives bright white color. The ALS light is similar to the backlight except that it uses an ambient light sensor instead of an LED light source. The third type of light is called RGB lighting. It has red, green, blue, cyan, magenta, yellow, and white light sources. These colors can be changed according to your preference.
The following steps show how to change the lights on your Redragon keyboard.
- To change the lights on the Redragon keyboard press FN+[→] repeatedly it will change the lights each time you press the key combination of FN+[→].
- You can also change the color of your Redragon keyboard by using Redragon keyboard manager software named Redragon ZONE.
- Download, install and then open Redragon Zone.
- It will automatically detect your keyboard model.
- Go to the Appearance section.
- From there you can change the lights of your Redragon keyboard.
- After changing the lights save the settings.
How do I reset my Redragon Bluetooth keyboard?
Resetting your Redragon Bluetooth keyboard will help you in getting rid of any error messages. You need to follow some simple steps to reset your Redragon Bluetooth keyboard.
Steps to Reset Redragon Bluetooth Keyboard
- First, disconnect the power cable from your keyboard.
- Press and hold the button on your keyboard.
- Wait for about 10 seconds until you hear a sound like “beep-beep”.
- Release the button on your keyboard and connect the power cable to your keyboard.
- If you still get the same error message, repeat step 4.
- If you still get an error message, contact the manufacturer of your keyboard.
How to fix the problem with the Redragon keyboard?
There are many reasons why your Redragon keyboard may stop working properly. Here we have listed some common problems that might occur when your Redragon keyboard stops working.
Problem 1: Unable To Use Keyboard After Turning On PC
If you are unable to use your keyboard or mouse after turning on your PC, then this issue occurs. In this case, you should check whether the USB port is connected correctly or not. Also, make sure that the power supply is plugged in properly.
If you are facing this issue, then first unplug the keyboard from the USB port. Then reconnect it again.
Problem 2: Some Keys Are Not Working
If you are able to use your keyboard but you are unable to use the special keys such as F1, F2, etc., then this issue occurs. To resolve this issue, you should try restarting your computer. After restarting your computer, you should remove all the extra programs installed on your system. This will free up memory space so that your computer can run faster.
In order to solve this issue, you should reboot your computer. After rebooting your computer, you should uninstall all the unnecessary applications. This will free up more memory space so that your system runs faster.
Problem 3: Connection Problems
If you are experiencing issues while connecting your keyboard to your laptop, then this issue occurs due to improper installation of drivers. So, before installing the driver, you should download the latest version of the driver from the official website.
In order to resolve this issue, you must update the BIOS of your motherboard. For updating the BIOS, you should refer to the manual of your motherboard.
Problem 4: Hard Buttons
If you are having trouble typing text on your keyboard, then this issue occurs because of the dust inside the keyboard. Therefore, you should clean out the dust from the keyboard.
You can clean out the dust from your keyboard by following these steps. Firstly, turn off your keyboard. Then press and hold the key on your keyboard. After holding the key for about 5 seconds, release the key. Now open the cover of your keyboard and remove the dust using a soft brush. Finally, close the cover of your keyboard.
Problem 5: Smartphone Connection Problems
If you are not able to pair your keyboard with your smartphone, then this issue occurs and you should reset your keyboard.
You can reset your keyboard by following these simple steps. Firstly, disconnect the power cord from your keyboard. Then press the Reset button located at the back side of your keyboard. After pressing the Reset button, wait for a few minutes until the light turns off. Finally, plug the power cord into your keyboard again.
In conclusion, there are many reasons why Redragon Keyboard Lights are Not Working. Like it may be turned off from the keyboard, turned off from Redragon software if installed, or power or hardware failure, due to corrupted drivers, or maybe it is due to a virus attack. Fortunately, you can recover your Redragon keyboard from all of these issues easier to solve the problem of Redragon Keyboard Lights not working.